1 Channel Switched- Mode Constant Current LED Controller | E522.31 - Lighting - Elmos Semiconductor SE

LIN/CAN Transceiver and System Basis Chip LIN Transceiver and System Basis Chip

Part-No. / Function	Interface	V_SUPPLY	V_DD	Iq	ESD	Bitrate	Package
E521.25 LIN SBC with Voltage Regulator	LIN 2.1 LIN 2.2 SAE-J2602 ISO9141	5V to 28V	3.3V	10µA	8kV	up to 115/250 Kbit/s	QFN20L5

DC/DC Converter Automotive

Part-No. / Function	Recommended I_MAX	Efficiency	V_OUT	V_SUPPLY	Package	Comment
E522.01 Low Quiescent Current Step Down Converter (5V/500mA)	500mA	>90%	5V	4.5V to 40V	QFN20L4* TSSOP16	Idle current of 12μA typ. Sleep current of 8μA typ. Input voltage up to 40V Up to 100% duty cycle Undervoltage lockout
E522.02 Low Quiescent Current Step Down Converter (3.3V/500mA)	500mA	>90%	3.3V	4.5V to 40V	QFN20L4* TSSOP16	Idle current of 12μA typ. Sleep current of 8μA typ. Input voltage up to 40V Up to 100% duty cycle Undervoltage lockout
E522.03 Low Quiescent Current Step Down Converter (5V/350mA)	350mA	>90%	5V	4.5V to 40V	QFN20L4* TSSOP16	Idle current of 12μA typ. Sleep current of 8μA typ. Input voltage up to 40V Up to 100% duty cycle Undervoltage lockout
E522.04 Low Quiescent Current Step Down Converter (3.3V/350mA)	350mA	>90%	3.3V	4.5V to 40V	QFN20L4* TSSOP16	Idle current of 12μA typ. Sleep current of 8μA typ. Input voltage up to 40V Up to 100% duty cycle Undervoltage lockout
E522.05 Low Quiescent Current Step Down Converter (Adjustable Voltage/500mA)	500mA	>90%	1.5V to 40V	4.5V to 40V	QFN20L4* TSSOP16	Idle current of 12μA typ. Sleep current of 8μA typ. Input voltage up to 40V Up to 100% duty cycle Undervoltage lockout
E522.06 Low Quiescent Current Step Down Converter (Adjustable Voltage/350mA)	350mA	>90%	1.5V to 40V	4.3V to 40V	QFN20L4* TSSOP16	Idle current of 12μA typ. Sleep current of 8μA typ. Input voltage up to 40V Up to 100% duty cycle Undervoltage lockout
E522.10 Low Quiescent Current Step Down Converter	2000mA	>90%	Adjustable with 200 / 800mV Vref	3.8V to 40V	QFN20L4 *) SOIC8-EP	Idle current of 15µA typ. Sleep current of 10µA typ. Input voltage up to 40V Up to 100% duty cycle Undervoltage lockout

Power Management LED Driver

Part-No. / Function	Efficiency	V_SUPPLY	I_OUT	Package	Comment
E522.48 16 Channel LED Driver with I²C Interface	-	5V to 40V	-	QFN32L6	Linear Controller ISO26262 - ASIL-B, Power Zeroing Function
E522.49 16 Channel LED Driver with Bus Interface	-	5V to 40V	-	QFN32L6	ISO26262 - ASIL-B, Power Zeroing Function
E522.80/E522.81/E522.82/E522.83 Triple Linear LED Controller (High Current Version 48 to 151mA)	-	5V to 25V	3 x 150 or 450mA	SOIC16N-EP	Linear Controller Power Zeroing Function
E522.84/E522.85/E522.86 Triple Linear LED Controller (Low Current Version 20 to 60mA)	-	5V to 25V	3 x 60 or 180mA	SOIC8-EP	Linear Controller
E522.90/E522.91/E522.92/E522.93 Triple 55mA Linear LED Controller (14 to 55mA)	-	5V to 25V	3 x 55 or 165mA	SOIC16N-EP	Linear Controller Power Zeroing Function
E522.95 16 Channel Automotive LED Driver with CAN FD	-	5V to 40V		QFN40L6	ISO26262 - ASIL B Power Zeroing Function

DC/DC Converter Automotive

Part-No. / Function	Recommended I_MAX	Efficiency	V_OUT	V_SUPPLY	Package	Comment
E522.01 Low Quiescent Current Step Down Converter (5V/500mA)	500mA	>90%	5V	4.5V to 40V	QFN20L4* TSSOP16	Idle current of 12μA typ. Sleep current of 8μA typ. Input voltage up to 40V Up to 100% duty cycle Undervoltage lockout
E522.02 Low Quiescent Current Step Down Converter (3.3V/500mA)	500mA	>90%	3.3V	4.5V to 40V	QFN20L4* TSSOP16	Idle current of 12μA typ. Sleep current of 8μA typ. Input voltage up to 40V Up to 100% duty cycle Undervoltage lockout
E522.03 Low Quiescent Current Step Down Converter (5V/350mA)	350mA	>90%	5V	4.5V to 40V	QFN20L4* TSSOP16	Idle current of 12μA typ. Sleep current of 8μA typ. Input voltage up to 40V Up to 100% duty cycle Undervoltage lockout
E522.04 Low Quiescent Current Step Down Converter (3.3V/350mA)	350mA	>90%	3.3V	4.5V to 40V	QFN20L4* TSSOP16	Idle current of 12μA typ. Sleep current of 8μA typ. Input voltage up to 40V Up to 100% duty cycle Undervoltage lockout
E522.05 Low Quiescent Current Step Down Converter (Adjustable Voltage/500mA)	500mA	>90%	1.5V to 40V	4.5V to 40V	QFN20L4* TSSOP16	Idle current of 12μA typ. Sleep current of 8μA typ. Input voltage up to 40V Up to 100% duty cycle Undervoltage lockout
E522.06 Low Quiescent Current Step Down Converter (Adjustable Voltage/350mA)	350mA	>90%	1.5V to 40V	4.3V to 40V	QFN20L4* TSSOP16	Idle current of 12μA typ. Sleep current of 8μA typ. Input voltage up to 40V Up to 100% duty cycle Undervoltage lockout
E522.10 Low Quiescent Current Step Down Converter	2000mA	>90%	Adjustable with 200 / 800mV Vref	3.8V to 40V	QFN20L4 *) SOIC8-EP	Idle current of 15µA typ. Sleep current of 10µA typ. Input voltage up to 40V Up to 100% duty cycle Undervoltage lockout
E522.31 1 Channel Switched- Mode Constant Current LED Controller	-	>90%	up to 80V	5V to 55V	QFN32L5	DC/DC Boost, SEPIC, Buck-Boost or Buck incl.: charge pump for reverse poliariy and HS Switch
E522.32 2 Channel Switched- Mode Constant Current LED Controller	-	>90%	up to 80V	5V to 55V	QFN32L5	DC/DC Boost, SEPIC, Buck-Boost or Buck incl.: charge pump for reverse poliariy and HS Switch

Power Management LED Driver

Part-No. / Function	Efficiency	V_SUPPLY	I_OUT	Package	Comment
E522.31 1 Channel Switched- Mode Constant Current LED Controller (Oscillator Spectrum Spread)	>90%	5V to 55V	-	QFN32L5	Boost, SEPIC, Buck-Boost or Buck
E522.32 2 Channel Switched- Mode Constant Current LED Controller (Oscillator Spectrum Spread)	>90%	5V to 55V	-	QFN32L5	Boost, SEPIC, Buck-Boost or Buck
E522.48 16 Channel LED Driver with I²C Interface	-	5V to 40V	-	QFN32L6	Linear Controller ISO26262 - ASIL-B, Power Zeroing Function
E522.49 16 Channel LED Driver with Bus Interface	-	5V to 40V	-	QFN32L6	ISO26262 - ASIL-B, Power Zeroing Function
E522.60 3 Channel Automotive LED Driver	-	4.5 to 36V (max, 40V)	12 x 60mA	SO16-ep	Linear Controller Power Zeroing Function *)
E522.80/E522.81/E522.82/E522.83 Triple Linear LED Controller (High Current Version 48 to 151mA)	-	5V to 25V	3 x 150 or 450mA	SOIC16N-EP	Linear Controller Power Zeroing Function
E522.84/E522.85/E522.86 Triple Linear LED Controller (Low Current Version 20 to 60mA)	-	5V to 25V	3 x 60 or 180mA	SOIC8-EP	Linear Controller
E522.90/E522.91/E522.92/E522.93 Triple 55mA Linear LED Controller (14 to 55mA)	-	5V to 25V	3 x 55 or 165mA	SOIC16N-EP	Linear Controller Power Zeroing Function
E522.95 16 Channel Automotive LED Driver with CAN FD	-	5V to 40V		QFN40L6	ISO26262 - ASIL B Power Zeroing Function

Power Management LED Driver

Part-No. / Function	Efficiency	V_SUPPLY	I_OUT	Package	Comment
E522.48 16 Channel LED Driver with I²C Interface	-	5V to 40V	-	QFN32L6	Linear Controller ISO26262 - ASIL-B, Power Zeroing Function
E522.49 16 Channel LED Driver with Bus Interface	-	5V to 40V	-	QFN32L6	ISO26262 - ASIL-B, Power Zeroing Function
E522.60 3 Channel Automotive LED Driver	-	4.5 to 36V (max, 40V)	12 x 60mA	SO16-ep	Linear Controller Power Zeroing Function *)
E522.95 16 Channel Automotive LED Driver with CAN FD	-	5V to 40V		QFN40L6	ISO26262 - ASIL B Power Zeroing Function

DC/DC Converter Automotive

Part-No. / Function	Recommended I_MAX	Efficiency	V_OUT	V_SUPPLY	Package	Comment
E522.10 Low Quiescent Current Step Down Converter	2000mA	>90%	Adjustable with 200 / 800mV Vref	3.8V to 40V	QFN20L4 *) SOIC8-EP	Idle current of 15µA typ. Sleep current of 10µA typ. Input voltage up to 40V Up to 100% duty cycle Undervoltage lockout
E522.31 1 Channel Switched- Mode Constant Current LED Controller	-	>90%	up to 80V	5V to 55V	QFN32L5	DC/DC Boost, SEPIC, Buck-Boost or Buck incl.: charge pump for reverse poliariy and HS Switch
E522.32 2 Channel Switched- Mode Constant Current LED Controller	-	>90%	up to 80V	5V to 55V	QFN32L5	DC/DC Boost, SEPIC, Buck-Boost or Buck incl.: charge pump for reverse poliariy and HS Switch

Power Management LED Driver

Part-No. / Function	Efficiency	V_SUPPLY	I_OUT	Package	Comment
E522.31 1 Channel Switched- Mode Constant Current LED Controller (Oscillator Spectrum Spread)	>90%	5V to 55V	-	QFN32L5	Boost, SEPIC, Buck-Boost or Buck
E522.32 2 Channel Switched- Mode Constant Current LED Controller (Oscillator Spectrum Spread)	>90%	5V to 55V	-	QFN32L5	Boost, SEPIC, Buck-Boost or Buck

LIN/CAN Transceiver and System Basis Chip CAN Transceiver and System Basis Chip

Part-No. / Function	Interface	V_SUPPLY	V_DD	Iq	ESD	Bitrate	Package
E521.21 / E521.23 CAN-FD SBC with DC/DC and Highside Switch	11898-2/-5	5.5V to 40V	3.3V / 5V	30µA	8	up to 2 Mbit/s	QFN32L5

Motor Control Stepper Motor

Part-No. / Function	Interface	Output	V_SUPPLY	P(Motor) peak	RDS_ON	Package	Comment
E520.01 (*Driver IC) 12x Low-Side for 3 Stepper Motors with Stall Detection	SPI-compatible (3.3/5V)	12 channel	3V to 25V (42V)	≈12x 8.75W	1.5Ω	QFN32L5	Stall detection for stepper motors (E520.01) suitable for Full Step, Half Step, Wave Drive 245Hz LED mode 25kHz relay mode 25kHz linear PWM T_Junc peak = +150°C
E520.02 (*Driver IC) 12x Low-Side for 3 Stepper Motors	SPI-compatible (3.3/5V)	12 channel	3V to 25V (42V)	≈12x 8.75W	1.5Ω	QFN32L5	245Hz LED mode 25kHz relay mode 25kHz linear PWM T_Junc peak = +150°C
E520.03 (*Driver IC) 8x Low-Side for 2 Stepper Motors with Stall Detection	SPI-compatible (3.3/5V)	8 channel	3V to 25V (42V)	≈8x 8.75W	1.5Ω	QFN32L5 SOIC20	Stall detection for stepper motors suitable for Full Step, Half Step, Wave Drive 245Hz LED mode 25kHz relay mode 25kHz linear PWM T_Junc peak = +150°C
E523.30 (*SoC) Power Stepper Controller with Stall Detection and Auto Addressing (LIN/PWM Interface)	LIN 2.x (1.3 comp.) or SAE-J2602 or PWM Interface Optional LIN Auto-Addressing (SNPD) only E523.30 or LIN Flash update JTAG	2 channel	5.5V to 20V (42V)	≈ 25W	550mΩ(HS) 450mΩ(LS)	QFN32L6	Current chopper motor control Supply and read-out of up to 3 sensors Embedded 8bit µC 8k FLASH T_Junc peak = +170°C
E523.39 (*Plug & Play) SPI Stepper Driver	SPI-compatible (3.3/5V)	2 channel	5V to 28V (42V)	40W	0.5Ω (HS) 0.5Ω (LS)	QFN20L5 QFN32L6	Stall-Detection / analysis / position correction Sensitive Fail-Current-Detection Over modulation with customized waveforms Supporting Adaptive-Holding-Torque Supporting Adaptive-Run-Current T_Junc peak = +170°C

Motor Control DC Motor

Part-No. / Function	Interface	V_SUPPLY	I_PEAK	P(Motor) max	RDS_ON	Package	Comment
E523.30 (*SoC) 2x Full Bridge Controller (LIN / PWM Interface)	LIN 2.x (1.3) or SAE-J2602 or PWM bidirectional LIN auto-addressing (slave mode position detection) LIN Flash update for EoL and Service JTAG	7V to 20V (5.5V to 42V)	2 channel	≈25W (per Motor)	225mΩ (HS) 275mΩ (LS)	QFN32L6	Drives 1 or 2 DC motors 8bit CPU, 8k FLASH, 64Byte E²PROM Current chopper motor control Supply and read-out of up to 3, potentiometers or sensors GPIO-pins T_Junc peak = +170°C (contact supplier for higher temperatures) (*Plug & Play) - Demosoftware on request

BLDC Motor BLDC Motor Driver

Part-No. / Function	Interface	V_SUPPLY	I_PEAK	P(Motor) peak	RDS_ON	Package	Comment
E523.10 (*SoC) BLDC-Motor Driver with Cold-Crank Capability	PWM bidirectional SPI for configuration	7V to 28V (4.5V to 42V)	6 channel	≈1.5kW (external FETs) ≈3W (direct drive)	8Ω (HS) 4Ω (LS)	QFN44L7	Voltage Regulator (3.3V/5V) selectable Precise deadtime generation Watchdog/Diagnostics T_Junc peak = +170°C

BLDC Motor BLDC Motor Controller

Part-No. / Function	Interface	V_SUPPLY	I_PEAK	P(Motor) peak	RDS_ON	Package	Comment
E523.62 (*SoC) Fully Integrated Motor Controller with 4 Half Bridges (under development)	LIN 2.2 autobaud interface and auto-addressing (compliant to LIN 2.0 and 1.3 and SAE-J2602-2), LIN 2.2 SNPD User-configurable GPIOs including SPI,SEND, analog input and ARM-SWD IF	7-18V (5.5V-28V limited; 40V load dump)	4ch with 600mA/ch	≈9W	1.6Ω (HS) 3.0Ω (LS)	TSSOP16-EP	Universal Controller to support BLDC, Stepper and Brushed DC Motors 40MHz ARM® Cortex®-M23 with 64kB Flash SysROM including Bootloader and LIN Stack MotCoS ready
E523.63 (*SoC) Fully Integrated Motor Controller with 4 Half Bridges (under development)	LIN 2.2 autobaud interface and auto-addressing (compliant to LIN 2.0 and 1.3 and SAE-J2602-2), LIN 2.2 SNPD User-configurable GPIOs including SPI,SEND, analog input and ARM-SWD IF	7-18V (5.5V-28V limited; 40V load dump)	4ch with 1000mA/ch	≈15W	0,6Ω (HS) 1,0Ω (LS)	TSSOP16-EP	Universal Controller to support BLDC, Stepper and Brushed DC Motors 40MHz ARM® Cortex®-M23 with 64kB Flash SysROM including Bootloader and LIN Stack MotCoS ready

Motor Control Stepper Motor

Part-No. / Function	Interface	V_SUPPLY	I_PEAK	P(Motor) peak	RDS_ON	Package	Comment
E523.62 (*SoC) Fully Integrated Motor Controller with 4 Half Bridges (under development)	LIN 2.2 autobaud interface and auto-addressing (compliant to LIN 2.0 and 1.3 and SAE-J2602-2), LIN 2.2 SNPD User-configurable GPIOs including SPI,SEND, analog input and ARM-SWD IF	7-18V (5.5V-28V limited; 40V load dump)	4ch with 600mA/ch	≈9W	1.6Ω (HS) 3.0Ω (LS)	TSSOP16-EP	Universal Controller to support BLDC, Stepper and Brushed DC Motors 40MHz ARM® Cortex®-M23 with 64kB Flash SysROM including Bootloader and LIN Stack MotCoS ready
E523.63 (*SoC) Fully Integrated Motor Controller with 4 Half Bridges (under development)	LIN 2.2 autobaud interface and auto-addressing (compliant to LIN 2.0 and 1.3 and SAE-J2602-2), LIN 2.2 SNPD User-configurable GPIOs including SPI,SEND, analog input and ARM-SWD IF	7-18V (5.5V-28V limited; 40V load dump)	4ch with 1000mA/ch	≈15W	0,6Ω (HS) 1,0Ω (LS)	TSSOP16-EP	Universal Controller to support BLDC, Stepper and Brushed DC Motors 40MHz ARM® Cortex®-M23 with 64kB Flash SysROM including Bootloader and LIN Stack MotCoS ready

Motor Control DC Motor

Part-No. / Function	Interface	V_SUPPLY	I_PEAK	P(Motor) max	RDS_ON	Package	Comment
E523.62 (*SoC) Fully Integrated Motor Controller with 4 Half Bridges (under development)	LIN 2.2 autobaud interface and auto-addressing (compliant to LIN 2.0 and 1.3 and SAE-J2602-2), LIN 2.2 SNPD User-configurable GPIOs including SPI,SEND, analog input and ARM-SWD IF	7-18V (5.5V-28V limited; 40V load dump)	4ch with 600mA/ch	≈9W	1.6Ω (HS) 3.0Ω (LS)	TSSOP16-EP	Universal Controller to support BLDC, Stepper and Brushed DC Motors 40MHz ARM® Cortex®-M23 with 64kB Flash SysROM including Bootloader and LIN Stack MotCoS ready
E523.63 (*SoC) Fully Integrated Motor Controller with 4 Half Bridges (under development)	LIN 2.2 autobaud interface and auto-addressing (compliant to LIN 2.0 and 1.3 and SAE-J2602-2), LIN 2.2 SNPD User-configurable GPIOs including SPI,SEND, analog input and ARM-SWD IF	7-18V (5.5V-28V limited; 40V load dump)	4ch with 1000mA/ch	≈15W	0,6Ω (HS) 1,0Ω (LS)	TSSOP16-EP	Universal Controller to support BLDC, Stepper and Brushed DC Motors 40MHz ARM® Cortex®-M23 with 64kB Flash SysROM including Bootloader and LIN Stack MotCoS ready

DC/DC Converter Automotive

Part-No. / Function	Recommended I_MAX	Efficiency	V_OUT	V_SUPPLY	Package	Comment
E522.31 1 Channel Switched- Mode Constant Current LED Controller	-	>90%	up to 80V	5V to 55V	QFN32L5	DC/DC Boost, SEPIC, Buck-Boost or Buck incl.: charge pump for reverse poliariy and HS Switch
E522.32 2 Channel Switched- Mode Constant Current LED Controller	-	>90%	up to 80V	5V to 55V	QFN32L5	DC/DC Boost, SEPIC, Buck-Boost or Buck incl.: charge pump for reverse poliariy and HS Switch

Power Management LED Driver

Part-No. / Function	Efficiency	V_SUPPLY	I_OUT	Package	Comment
E522.31 1 Channel Switched- Mode Constant Current LED Controller (Oscillator Spectrum Spread)	>90%	5V to 55V	-	QFN32L5	Boost, SEPIC, Buck-Boost or Buck
E522.32 2 Channel Switched- Mode Constant Current LED Controller (Oscillator Spectrum Spread)	>90%	5V to 55V	-	QFN32L5	Boost, SEPIC, Buck-Boost or Buck
E522.48 16 Channel LED Driver with I²C Interface	-	5V to 40V	-	QFN32L6	Linear Controller ISO26262 - ASIL-B, Power Zeroing Function
E522.49 16 Channel LED Driver with Bus Interface	-	5V to 40V	-	QFN32L6	ISO26262 - ASIL-B, Power Zeroing Function
E522.80/E522.81/E522.82/E522.83 Triple Linear LED Controller (High Current Version 48 to 151mA)	-	5V to 25V	3 x 150 or 450mA	SOIC16N-EP	Linear Controller Power Zeroing Function
E522.84/E522.85/E522.86 Triple Linear LED Controller (Low Current Version 20 to 60mA)	-	5V to 25V	3 x 60 or 180mA	SOIC8-EP	Linear Controller
E522.90/E522.91/E522.92/E522.93 Triple 55mA Linear LED Controller (14 to 55mA)	-	5V to 25V	3 x 55 or 165mA	SOIC16N-EP	Linear Controller Power Zeroing Function
E522.95 16 Channel Automotive LED Driver with CAN FD	-	5V to 40V		QFN40L6	ISO26262 - ASIL B Power Zeroing Function

DC/DC Converter Automotive

Part-No. / Function	Recommended I_MAX	Efficiency	V_OUT	V_SUPPLY	Package	Comment
E522.01 Low Quiescent Current Step Down Converter (5V/500mA)	500mA	>90%	5V	4.5V to 40V	QFN20L4* TSSOP16	Idle current of 12μA typ. Sleep current of 8μA typ. Input voltage up to 40V Up to 100% duty cycle Undervoltage lockout
E522.02 Low Quiescent Current Step Down Converter (3.3V/500mA)	500mA	>90%	3.3V	4.5V to 40V	QFN20L4* TSSOP16	Idle current of 12μA typ. Sleep current of 8μA typ. Input voltage up to 40V Up to 100% duty cycle Undervoltage lockout
E522.03 Low Quiescent Current Step Down Converter (5V/350mA)	350mA	>90%	5V	4.5V to 40V	QFN20L4* TSSOP16	Idle current of 12μA typ. Sleep current of 8μA typ. Input voltage up to 40V Up to 100% duty cycle Undervoltage lockout
E522.04 Low Quiescent Current Step Down Converter (3.3V/350mA)	350mA	>90%	3.3V	4.5V to 40V	QFN20L4* TSSOP16	Idle current of 12μA typ. Sleep current of 8μA typ. Input voltage up to 40V Up to 100% duty cycle Undervoltage lockout
E522.05 Low Quiescent Current Step Down Converter (Adjustable Voltage/500mA)	500mA	>90%	1.5V to 40V	4.5V to 40V	QFN20L4* TSSOP16	Idle current of 12μA typ. Sleep current of 8μA typ. Input voltage up to 40V Up to 100% duty cycle Undervoltage lockout
E522.06 Low Quiescent Current Step Down Converter (Adjustable Voltage/350mA)	350mA	>90%	1.5V to 40V	4.3V to 40V	QFN20L4* TSSOP16	Idle current of 12μA typ. Sleep current of 8μA typ. Input voltage up to 40V Up to 100% duty cycle Undervoltage lockout
E522.10 Low Quiescent Current Step Down Converter	2000mA	>90%	Adjustable with 200 / 800mV Vref	3.8V to 40V	QFN20L4 *) SOIC8-EP	Idle current of 15µA typ. Sleep current of 10µA typ. Input voltage up to 40V Up to 100% duty cycle Undervoltage lockout

Power Management LED Driver

Part-No. / Function	Efficiency	V_SUPPLY	I_OUT	Package	Comment
E522.48 16 Channel LED Driver with I²C Interface	-	5V to 40V	-	QFN32L6	Linear Controller ISO26262 - ASIL-B, Power Zeroing Function
E522.49 16 Channel LED Driver with Bus Interface	-	5V to 40V	-	QFN32L6	ISO26262 - ASIL-B, Power Zeroing Function
E522.80/E522.81/E522.82/E522.83 Triple Linear LED Controller (High Current Version 48 to 151mA)	-	5V to 25V	3 x 150 or 450mA	SOIC16N-EP	Linear Controller Power Zeroing Function
E522.84/E522.85/E522.86 Triple Linear LED Controller (Low Current Version 20 to 60mA)	-	5V to 25V	3 x 60 or 180mA	SOIC8-EP	Linear Controller
E522.90/E522.91/E522.92/E522.93 Triple 55mA Linear LED Controller (14 to 55mA)	-	5V to 25V	3 x 55 or 165mA	SOIC16N-EP	Linear Controller Power Zeroing Function
E522.95 16 Channel Automotive LED Driver with CAN FD	-	5V to 40V		QFN40L6	ISO26262 - ASIL B Power Zeroing Function

DC/DC Converter Automotive

Part-No. / Function	Recommended I_MAX	Efficiency	V_OUT	V_SUPPLY	Package	Comment
E522.31 1 Channel Switched- Mode Constant Current LED Controller	-	>90%	up to 80V	5V to 55V	QFN32L5	DC/DC Boost, SEPIC, Buck-Boost or Buck incl.: charge pump for reverse poliariy and HS Switch
E522.32 2 Channel Switched- Mode Constant Current LED Controller	-	>90%	up to 80V	5V to 55V	QFN32L5	DC/DC Boost, SEPIC, Buck-Boost or Buck incl.: charge pump for reverse poliariy and HS Switch

Power Management LED Driver

Part-No. / Function	Efficiency	V_SUPPLY	I_OUT	Package	Comment
E522.31 1 Channel Switched- Mode Constant Current LED Controller (Oscillator Spectrum Spread)	>90%	5V to 55V	-	QFN32L5	Boost, SEPIC, Buck-Boost or Buck
E522.32 2 Channel Switched- Mode Constant Current LED Controller (Oscillator Spectrum Spread)	>90%	5V to 55V	-	QFN32L5	Boost, SEPIC, Buck-Boost or Buck
E522.48 16 Channel LED Driver with I²C Interface	-	5V to 40V	-	QFN32L6	Linear Controller ISO26262 - ASIL-B, Power Zeroing Function
E522.49 16 Channel LED Driver with Bus Interface	-	5V to 40V	-	QFN32L6	ISO26262 - ASIL-B, Power Zeroing Function
E522.80/E522.81/E522.82/E522.83 Triple Linear LED Controller (High Current Version 48 to 151mA)	-	5V to 25V	3 x 150 or 450mA	SOIC16N-EP	Linear Controller Power Zeroing Function
E522.84/E522.85/E522.86 Triple Linear LED Controller (Low Current Version 20 to 60mA)	-	5V to 25V	3 x 60 or 180mA	SOIC8-EP	Linear Controller
E522.90/E522.91/E522.92/E522.93 Triple 55mA Linear LED Controller (14 to 55mA)	-	5V to 25V	3 x 55 or 165mA	SOIC16N-EP	Linear Controller Power Zeroing Function
E522.95 16 Channel Automotive LED Driver with CAN FD	-	5V to 40V		QFN40L6	ISO26262 - ASIL B Power Zeroing Function

Power Management LED Driver

Part-No. / Function	Efficiency	V_SUPPLY	I_OUT	Package	Comment
E521.31 LIN Controller with Position Detection	-	5V to 28V (max. 40V)	4 x 50mA	QFN32L5	Linear Controller 1^st Gen RGB LED driver (incl.: Flash, 4xPWM, 5V/100mA LDO)
E521.36 RGB LIN Controller with Current Source	-	5V to 28V (max. 40V)	3 x 40mA	SOIC8-EP	Linear Controller 2^nd Gen RGB LED driver (incl.: OTP, 4xPWM, 5V/100mA LDO)
E521.39 RGBW LED Driver with LIN Interface	-	5V to 28V (max. 40V)	4 x max 60mA for RGB or RGBW LEDs	SOIC8-EP	3rd generation RGBW LED driver with LIN interface Integrated 32kB flash Memory LIN Auto Addressing supporting 1Ω and 0.2Ω BSM
E522.60 3 Channel Automotive LED Driver	-	4.5 to 36V (max, 40V)	12 x 60mA	SO16-ep	Linear Controller Power Zeroing Function *)

LIN/CAN Transceiver and System Basis Chip LIN RGB Controller

Part-No. / Function	Interface	V_SUPPLY	V_DD	Iq	ESD	Bitrate	Package
E521.31 (*SoC) LIN Controller with Position Detection	LIN 2.1 LIN 2.2 SAE-J2602	5V to 28V (max. 40V)	5V	10µA	8	up to 20 Kbit/s	QFN32L5
E521.36 (*SoC) RGB LIN Controller with Current Source	LIN 2.1 LIN 2.2 SAE-J2602	5V to 28V (max. 40V)	-	15µA	8 kV	up to 20 Kbit/s	SOIC8-EP

Power Management LED Driver

Part-No. / Function	Efficiency	V_SUPPLY	I_OUT	Package	Comment
E522.60 3 Channel Automotive LED Driver	-	4.5 to 36V (max, 40V)	12 x 60mA	SO16-ep	Linear Controller Power Zeroing Function *)

Power Management LED Driver

Part-No. / Function	Efficiency	V_SUPPLY	I_OUT	Package	Comment
E522.84/E522.85/E522.86 Triple Linear LED Controller (Low Current Version 20 to 60mA)	-	5V to 25V	3 x 60 or 180mA	SOIC8-EP	Linear Controller
E522.90/E522.91/E522.92/E522.93 Triple 55mA Linear LED Controller (14 to 55mA)	-	5V to 25V	3 x 55 or 165mA	SOIC16N-EP	Linear Controller Power Zeroing Function

Cookie settings

Our website uses technically necessary cookies, which must be set so that this website can be displayed correctly. In addition, we use statistics cookies to track the success of this website. You can edit the cookie settings at any time by clicking on the "Show cookie popup" button (usually on the bottom left or in the footer). If you no longer wish to consent to cookies for statistics, deactivate the checkboxes. For more information, please see our privacy policy.

Further details on the cookies used by us or by third parties on our website can be found here.

Required Statistics

	Title	Provider	Reason	Validity period	Names(s) of cookie(s)	Cookie domains
Required
	__cfduid	SiteSearch 360	Used by content delivery network Cloudflare to identify trusted web traffic.	1 Jahr	__cfduid	sitesearch360.com
	SiteSearch 360	SiteSearch 360	Is used for the search function of the website	1 Day	ssi--sessionId,ssi--lastInteraction	www.elmos.com
	HackShield EU-Cookie Opt-in	Elmos Semiconductor SE	Saves the cookie banner settings.	1 Year	hst3_cookieconsent	www.elmos.com
Statistics
	Matomo (Piwik)	Matomo (Piwik)	Visitor statistics for website optimization, bug analysis, cyber security pk_id – 13 months (used to store a few details about the user such as the unique visitor ID) _pk_ref – 6 months (used to store the attribution information, the referrer initially used to visit the website) _pk_ses, _pk_cvar, _pk_hsr – 30 minutes (short lived cookies used to temporarily store data for the visit) _pk_testcookie is created and should be then directly deleted (used to check whether the visitor’s browser supports cookies)	up to 13 months	_pk_ref, _pk_cvar, _pk_id, _pk_ses, _pk_hsr, _pk_testcookie, MATOMO_SESSID	www.elmos.com, kundenbereich.plehn-media.de