Body & Convenience - Elmos Semiconductor SE

Motor Control Stepper Motor

Part-No. / Function	Interface	Output	V_SUPPLY	P(Motor) peak	RDS_ON	Package	Comment
E523.30 (*SoC) Power Stepper Controller with Stall Detection and Auto Addressing (LIN/PWM Interface)	LIN 2.x (1.3 comp.) or SAE-J2602 or PWM Interface Optional LIN Auto-Addressing (SNPD) only E523.30 or LIN Flash update JTAG	2 channel	5.5V to 20V (42V)	≈ 25W	550mΩ(HS) 450mΩ(LS)	QFN32L6	Current chopper motor control Supply and read-out of up to 3 sensors Embedded 8bit µC 8k FLASH T_Junc peak = +170°C

LIN/CAN Transceiver and System Basis Chip CAN Transceiver and System Basis Chip

Part-No. / Function	Interface	V_SUPPLY	V_DD	Iq	ESD	Bitrate	Package
E521.21 / E521.23 CAN-FD SBC with DC/DC and Highside Switch	11898-2/-5	5.5V to 40V	3.3V / 5V	30µA	8	up to 2 Mbit/s	QFN32L5

Interface Transceiver PSI5 Transceiver

Part-No. / Function	V_SUPPLY	Iq	ESD	Bitrate	Package
E521.40 2-Channel Multi-Mode PSI5 Transceiver	5.3V to 19V	1	4kV	up to 189 Kbit/s	QFN20L5 SOIC20
E521.41 4-Channel Multi-Mode PSI5 Transceiver	5.3V to 19V	2	4kV	up to 189 Kbit/s	QFN20L5 SOIC20
E981.07 2-Channel Sensor Interface PSI5	8.5V to 25V	1	4kV	125 Kbit/s	QFN20L5
E981.08 4-Channel Sensor Interface PSI5	8.5V to 25V	1	4kV	125 Kbit/s	QFN32L7

DC/DC Converter Automotive

Part-No. / Function	Recommended I_MAX	Efficiency	V_OUT	V_SUPPLY	Package	Comment
E522.01 Low Quiescent Current Step Down Converter (5V/500mA)	500mA	>90%	5V	4.5V to 40V	QFN20L4* TSSOP16	Idle current of 12μA typ. Sleep current of 8μA typ. Input voltage up to 40V Up to 100% duty cycle Undervoltage lockout
E522.02 Low Quiescent Current Step Down Converter (3.3V/500mA)	500mA	>90%	3.3V	4.5V to 40V	QFN20L4* TSSOP16	Idle current of 12μA typ. Sleep current of 8μA typ. Input voltage up to 40V Up to 100% duty cycle Undervoltage lockout
E522.03 Low Quiescent Current Step Down Converter (5V/350mA)	350mA	>90%	5V	4.5V to 40V	QFN20L4* TSSOP16	Idle current of 12μA typ. Sleep current of 8μA typ. Input voltage up to 40V Up to 100% duty cycle Undervoltage lockout
E522.04 Low Quiescent Current Step Down Converter (3.3V/350mA)	350mA	>90%	3.3V	4.5V to 40V	QFN20L4* TSSOP16	Idle current of 12μA typ. Sleep current of 8μA typ. Input voltage up to 40V Up to 100% duty cycle Undervoltage lockout
E522.05 Low Quiescent Current Step Down Converter (Adjustable Voltage/500mA)	500mA	>90%	1.5V to 40V	4.5V to 40V	QFN20L4* TSSOP16	Idle current of 12μA typ. Sleep current of 8μA typ. Input voltage up to 40V Up to 100% duty cycle Undervoltage lockout
E522.06 Low Quiescent Current Step Down Converter (Adjustable Voltage/350mA)	350mA	>90%	1.5V to 40V	4.3V to 40V	QFN20L4* TSSOP16	Idle current of 12μA typ. Sleep current of 8μA typ. Input voltage up to 40V Up to 100% duty cycle Undervoltage lockout
E522.10 Low Quiescent Current Step Down Converter	2000mA	>90%	Adjustable with 200 / 800mV Vref	3.8V to 40V	QFN20L4 *) SOIC8-EP	Idle current of 15µA typ. Sleep current of 10µA typ. Input voltage up to 40V Up to 100% duty cycle Undervoltage lockout

Power Management LED Driver

Part-No. / Function	Efficiency	V_SUPPLY	I_OUT	Package	Comment
E522.84/E522.85/E522.86 Triple Linear LED Controller (Low Current Version 20 to 60mA)	-	5V to 25V	3 x 60 or 180mA	SOIC8-EP	Linear Controller

BLDC Motor BLDC Motor Driver

Part-No. / Function	Interface	V_SUPPLY	I_PEAK	P(Motor) peak	RDS_ON	Package	Comment
E523.01 (*SBC) B6 Bridge FET Driver (LIN/PWM Interface)	LIN 2.x (1.3 comp.), SAE-J2602(only E523.01) or PWM bidirectional LIN Flash update	7V to 28V (5V to 42V)	6 channel	≈1.5kW (external FETs) ≈3W (direct drive)	8Ω (HS) 4Ω (LS)	QFN44L7 QSOP44	Voltage Regulator (3.3V/5V) selectable Precise deadtime generation Watchdog/Diagnostics T_Junc peak = +170°C Demo software on request (sensorless sinus)

Motor Control DC Motor

Part-No. / Function	Interface	V_SUPPLY	I_PEAK	P(Motor) max	RDS_ON	Package	Comment
E523.05 (SoC / Plug & Play) DC 2x Half-Bridge Controller with 16bit CPU (LIN / PWM Interface)	LIN 2.x (1.3 comp.), SAE-J2602 or PWM bidirectional SPI for configuration LIN Flash update JTAG	7V to 28V (5V to 42V)	6 channel	≈1.5kW (external FETs) ≈3W (direct drive)	8Ω (HS) 4Ω (LS)	QFN48L7	16bit/48 MHzCPU assisted by 2 powerful co-processors Library ROM for LIN-stack software update via LIN Charge Pump Driver included T_Junc peak = +125°C (Contact supplier for higher temperature)
E523.06 (*SoC) Field-Oriented DC Motor Controller with 16 Bit CPU	LIN 2.x (1.3 comp.), SAE-J2602 or PWM bidirectional SPI for configuration LIN Flash update JTAG	7V to 28V (5V to 42V)	6x ±400mA	≈1.5kW (external FETs) ≈1.3W (direct drive)	8Ω (HS) 4Ω (LS)	QFN48L7	16bit/48 MHzCPU assisted by 2 powerful co-processors Library ROM for LIN-stack software update via LIN Charge Pump Driver included T_Junc peak = +125°C (Contact supplier for higher temperature)

BLDC Motor BLDC Motor Controller

Part-No. / Function	Interface	V_SUPPLY	I_PEAK	P(Motor) peak	RDS_ON	Package	Comment
E523.05 (*SoC) BLDC Motor Controller with 16bit CPU (LIN/PWM Interface)	LIN 2.x (1.3 comp.), SAE-J2602 or PWM bidirectional SPI for expansion LIN Flash update JTAG	7V to 28V (5V to 42V)	6 channel	≈1.5kW (external FETs) ≈3W (direct drive)	8Ω (HS) 4Ω (LS)	QFN48L7	For new designs E523.06 is recommended 16bit / 48 MHzCPU assisted by 2 powerful co-processors Library ROM for LIN-stack, software update via LIN Software support on request T_Junc peak = +125°C (contact supplier for higher temperature)
E523.06 (*SoC) Field-Oriented BLDC Motor Controller with 16 Bit CPU	LIN 2.x (1.3 comp.), SAE-J2602 or PWM bidirectional SPI for expansion LIN Flash update JTAG	7V to 28V (5V to 42V)	6 channel	≈1.5kW (external FETs) ≈3W (direct drive)	8Ω (HS) 4Ω (LS)	QFN48L7 LQFP48L7EP	16bit / 48 MHzCPU assisted by 2 powerful co-processors Library ROM for LIN-stack, software update via LIN Software support on request T_Junc peak = +125°C (contact supplier for higher temperature) Plug & Play: Demosoftware for - sensorless HVAC fan, engine cooling fan - field oriented control (FOC) for pumps
E523.52 (*SoC) 72V Brushless Motor Gate Driver with 16bit CPU	LIN Interface with external LIN transceiver PWM Interface with external components SPI for user expansion LIN Flash update JTAG	12V to 72V (7V to 76V)	6 channel	≈1.5kW (external FETs)	10Ω (HS) 5Ω (LS)	QFN36L7	Usable for 24/48V automotive Board Net 16bit/48 MHz CPU assisted by 2 powerful co-processors Library ROM for LIN-stack software update via LIN (software support on request) T_Junc peak = +150°C

BLDC Motor BLDC Motor Driver

Part-No. / Function	Interface	V_SUPPLY	I_PEAK	P(Motor) peak	RDS_ON	Package	Comment
E523.10 (*SoC) BLDC-Motor Driver with Cold-Crank Capability	PWM bidirectional SPI for configuration	7V to 28V (4.5V to 42V)	6 channel	≈1.5kW (external FETs) ≈3W (direct drive)	8Ω (HS) 4Ω (LS)	QFN44L7	Voltage Regulator (3.3V/5V) selectable Precise deadtime generation Watchdog/Diagnostics T_Junc peak = +170°C

Motor Control Stepper Motor

Part-No. / Function	Interface	Output	V_SUPPLY	I_PEAK	P(Motor) peak	RDS_ON	Package	Comment
E523.30 (*SoC) Power Stepper Controller with Stall Detection and Auto Addressing (LIN/PWM Interface)	LIN 2.x (1.3 comp.) or SAE-J2602 or PWM Interface Optional LIN Auto-Addressing (SNPD) only E523.30 or LIN Flash update JTAG	2 channel	5.5V to 20V (42V)		≈ 25W	550mΩ(HS) 450mΩ(LS)	QFN32L6	Current chopper motor control Supply and read-out of up to 3 sensors Embedded 8bit µC 8k FLASH T_Junc peak = +170°C
E523.39 (*Plug & Play) SPI Stepper Driver	SPI-compatible (3.3/5V)	2 channel	5V to 28V (42V)		40W	0.5Ω (HS) 0.5Ω (LS)	QFN20L5 QFN32L6	Stall-Detection / analysis / position correction Sensitive Fail-Current-Detection Over modulation with customized waveforms Supporting Adaptive-Holding-Torque Supporting Adaptive-Run-Current T_Junc peak = +170°C
E523.62 (*SoC) Fully Integrated Motor Controller with 4 Half Bridges (under development)	LIN 2.2 autobaud interface and auto-addressing (compliant to LIN 2.0 and 1.3 and SAE-J2602-2), LIN 2.2 SNPD User-configurable GPIOs including SPI,SEND, analog input and ARM-SWD IF		7-18V (5.5V-28V limited; 40V load dump)	4ch with 600mA/ch	≈9W	1.6Ω (HS) 3.0Ω (LS)	TSSOP16-EP	Universal Controller to support BLDC, Stepper and Brushed DC Motors 40MHz ARM® Cortex®-M23 with 64kB Flash SysROM including Bootloader and LIN Stack MotCoS ready
E523.63 (*SoC) Fully Integrated Motor Controller with 4 Half Bridges (under development)	LIN 2.2 autobaud interface and auto-addressing (compliant to LIN 2.0 and 1.3 and SAE-J2602-2), LIN 2.2 SNPD User-configurable GPIOs including SPI,SEND, analog input and ARM-SWD IF		7-18V (5.5V-28V limited; 40V load dump)	4ch with 1000mA/ch	≈15W	0,6Ω (HS) 1,0Ω (LS)	TSSOP16-EP	Universal Controller to support BLDC, Stepper and Brushed DC Motors 40MHz ARM® Cortex®-M23 with 64kB Flash SysROM including Bootloader and LIN Stack MotCoS ready

BLDC Motor BLDC Motor Controller

Part-No. / Function	Interface	V_SUPPLY	I_PEAK	P(Motor) peak	RDS_ON	Package	Comment
E523.62 (*SoC) Fully Integrated Motor Controller with 4 Half Bridges (under development)	LIN 2.2 autobaud interface and auto-addressing (compliant to LIN 2.0 and 1.3 and SAE-J2602-2), LIN 2.2 SNPD User-configurable GPIOs including SPI,SEND, analog input and ARM-SWD IF	7-18V (5.5V-28V limited; 40V load dump)	4ch with 600mA/ch	≈9W	1.6Ω (HS) 3.0Ω (LS)	TSSOP16-EP	Universal Controller to support BLDC, Stepper and Brushed DC Motors 40MHz ARM® Cortex®-M23 with 64kB Flash SysROM including Bootloader and LIN Stack MotCoS ready
E523.63 (*SoC) Fully Integrated Motor Controller with 4 Half Bridges (under development)	LIN 2.2 autobaud interface and auto-addressing (compliant to LIN 2.0 and 1.3 and SAE-J2602-2), LIN 2.2 SNPD User-configurable GPIOs including SPI,SEND, analog input and ARM-SWD IF	7-18V (5.5V-28V limited; 40V load dump)	4ch with 1000mA/ch	≈15W	0,6Ω (HS) 1,0Ω (LS)	TSSOP16-EP	Universal Controller to support BLDC, Stepper and Brushed DC Motors 40MHz ARM® Cortex®-M23 with 64kB Flash SysROM including Bootloader and LIN Stack MotCoS ready

Motor Control DC Motor

Part-No. / Function	Interface	V_SUPPLY	I_PEAK	P(Motor) max	RDS_ON	Package	Comment
E523.62 (*SoC) Fully Integrated Motor Controller with 4 Half Bridges (under development)	LIN 2.2 autobaud interface and auto-addressing (compliant to LIN 2.0 and 1.3 and SAE-J2602-2), LIN 2.2 SNPD User-configurable GPIOs including SPI,SEND, analog input and ARM-SWD IF	7-18V (5.5V-28V limited; 40V load dump)	4ch with 600mA/ch	≈9W	1.6Ω (HS) 3.0Ω (LS)	TSSOP16-EP	Universal Controller to support BLDC, Stepper and Brushed DC Motors 40MHz ARM® Cortex®-M23 with 64kB Flash SysROM including Bootloader and LIN Stack MotCoS ready
E523.63 (*SoC) Fully Integrated Motor Controller with 4 Half Bridges (under development)	LIN 2.2 autobaud interface and auto-addressing (compliant to LIN 2.0 and 1.3 and SAE-J2602-2), LIN 2.2 SNPD User-configurable GPIOs including SPI,SEND, analog input and ARM-SWD IF	7-18V (5.5V-28V limited; 40V load dump)	4ch with 1000mA/ch	≈15W	0,6Ω (HS) 1,0Ω (LS)	TSSOP16-EP	Universal Controller to support BLDC, Stepper and Brushed DC Motors 40MHz ARM® Cortex®-M23 with 64kB Flash SysROM including Bootloader and LIN Stack MotCoS ready

Power Management LED Driver

Part-No. / Function	Efficiency	V_SUPPLY	I_OUT	Package	Comment
E522.84/E522.85/E522.86 Triple Linear LED Controller (Low Current Version 20 to 60mA)	-	5V to 25V	3 x 60 or 180mA	SOIC8-EP	Linear Controller

Power Management LED Driver

Part-No. / Function	Efficiency	V_SUPPLY	I_OUT	Package	Comment
E521.31 LIN Controller with Position Detection	-	5V to 28V (max. 40V)	4 x 50mA	QFN32L5	Linear Controller 1^st Gen RGB LED driver (incl.: Flash, 4xPWM, 5V/100mA LDO)
E521.36 RGB LIN Controller with Current Source	-	5V to 28V (max. 40V)	3 x 40mA	SOIC8-EP	Linear Controller 2^nd Gen RGB LED driver (incl.: OTP, 4xPWM, 5V/100mA LDO)
E521.39 RGBW LED Driver with LIN Interface	-	5V to 28V (max. 40V)	4 x max 60mA for RGB or RGBW LEDs	SOIC8-EP	3rd generation RGBW LED driver with LIN interface Integrated 32kB flash Memory LIN Auto Addressing supporting 1Ω and 0.2Ω BSM

LIN/CAN Transceiver and System Basis Chip LIN RGB Controller

Part-No. / Function	Interface	V_SUPPLY	V_DD	Iq	ESD	Bitrate	Package
E521.31 (*SoC) LIN Controller with Position Detection	LIN 2.1 LIN 2.2 SAE-J2602	5V to 28V (max. 40V)	5V	10µA	8	up to 20 Kbit/s	QFN32L5
E521.36 (*SoC) RGB LIN Controller with Current Source	LIN 2.1 LIN 2.2 SAE-J2602	5V to 28V (max. 40V)	-	15µA	8 kV	up to 20 Kbit/s	SOIC8-EP

Interface Transceiver PSI5 Transceiver

Part-No. / Function	V_SUPPLY	Iq	ESD	Bitrate	Package
E521.40 2-Channel Multi-Mode PSI5 Transceiver	5.3V to 19V	1	4kV	up to 189 Kbit/s	QFN20L5 SOIC20
E521.41 4-Channel Multi-Mode PSI5 Transceiver	5.3V to 19V	2	4kV	up to 189 Kbit/s	QFN20L5 SOIC20
E981.07 2-Channel Sensor Interface PSI5	8.5V to 25V	1	4kV	125 Kbit/s	QFN20L5
E981.08 4-Channel Sensor Interface PSI5	8.5V to 25V	1	4kV	125 Kbit/s	QFN32L7

Optical IR Sensor Rain and Light

Part-No. / Function	V_SUPPLY	Iq	Package	Comment
E527.04 Rain and Light Sensor	3.1V to 3.5V	4.7mA (typical)** 8µA (sleep mode)	QFN20L4	Rain-Light sensor signa processor Built-in sunlight rejection Two rain channels and ambient light channels SPI interface Internal diagnosis Integrated temperature sensor

BLDC Motor BLDC Motor Driver

Part-No. / Function	Interface	V_SUPPLY	I_PEAK	P(Motor) peak	RDS_ON	Package	Comment
E523.10 (*SoC) BLDC-Motor Driver with Cold-Crank Capability	PWM bidirectional SPI for configuration	7V to 28V (4.5V to 42V)	6 channel	≈1.5kW (external FETs) ≈3W (direct drive)	8Ω (HS) 4Ω (LS)	QFN44L7	Voltage Regulator (3.3V/5V) selectable Precise deadtime generation Watchdog/Diagnostics T_Junc peak = +170°C

Motor Control Stepper Motor

Part-No. / Function	Interface	Output	V_SUPPLY	I_PEAK	P(Motor) peak	RDS_ON	Package	Comment
E523.30 (*SoC) Power Stepper Controller with Stall Detection and Auto Addressing (LIN/PWM Interface)	LIN 2.x (1.3 comp.) or SAE-J2602 or PWM Interface Optional LIN Auto-Addressing (SNPD) only E523.30 or LIN Flash update JTAG	2 channel	5.5V to 20V (42V)		≈ 25W	550mΩ(HS) 450mΩ(LS)	QFN32L6	Current chopper motor control Supply and read-out of up to 3 sensors Embedded 8bit µC 8k FLASH T_Junc peak = +170°C
E523.62 (*SoC) Fully Integrated Motor Controller with 4 Half Bridges (under development)	LIN 2.2 autobaud interface and auto-addressing (compliant to LIN 2.0 and 1.3 and SAE-J2602-2), LIN 2.2 SNPD User-configurable GPIOs including SPI,SEND, analog input and ARM-SWD IF		7-18V (5.5V-28V limited; 40V load dump)	4ch with 600mA/ch	≈9W	1.6Ω (HS) 3.0Ω (LS)	TSSOP16-EP	Universal Controller to support BLDC, Stepper and Brushed DC Motors 40MHz ARM® Cortex®-M23 with 64kB Flash SysROM including Bootloader and LIN Stack MotCoS ready
E523.63 (*SoC) Fully Integrated Motor Controller with 4 Half Bridges (under development)	LIN 2.2 autobaud interface and auto-addressing (compliant to LIN 2.0 and 1.3 and SAE-J2602-2), LIN 2.2 SNPD User-configurable GPIOs including SPI,SEND, analog input and ARM-SWD IF		7-18V (5.5V-28V limited; 40V load dump)	4ch with 1000mA/ch	≈15W	0,6Ω (HS) 1,0Ω (LS)	TSSOP16-EP	Universal Controller to support BLDC, Stepper and Brushed DC Motors 40MHz ARM® Cortex®-M23 with 64kB Flash SysROM including Bootloader and LIN Stack MotCoS ready

BLDC Motor BLDC Motor Controller

Part-No. / Function	Interface	V_SUPPLY	I_PEAK	P(Motor) peak	RDS_ON	Package	Comment
E523.62 (*SoC) Fully Integrated Motor Controller with 4 Half Bridges (under development)	LIN 2.2 autobaud interface and auto-addressing (compliant to LIN 2.0 and 1.3 and SAE-J2602-2), LIN 2.2 SNPD User-configurable GPIOs including SPI,SEND, analog input and ARM-SWD IF	7-18V (5.5V-28V limited; 40V load dump)	4ch with 600mA/ch	≈9W	1.6Ω (HS) 3.0Ω (LS)	TSSOP16-EP	Universal Controller to support BLDC, Stepper and Brushed DC Motors 40MHz ARM® Cortex®-M23 with 64kB Flash SysROM including Bootloader and LIN Stack MotCoS ready
E523.63 (*SoC) Fully Integrated Motor Controller with 4 Half Bridges (under development)	LIN 2.2 autobaud interface and auto-addressing (compliant to LIN 2.0 and 1.3 and SAE-J2602-2), LIN 2.2 SNPD User-configurable GPIOs including SPI,SEND, analog input and ARM-SWD IF	7-18V (5.5V-28V limited; 40V load dump)	4ch with 1000mA/ch	≈15W	0,6Ω (HS) 1,0Ω (LS)	TSSOP16-EP	Universal Controller to support BLDC, Stepper and Brushed DC Motors 40MHz ARM® Cortex®-M23 with 64kB Flash SysROM including Bootloader and LIN Stack MotCoS ready

Motor Control DC Motor

Part-No. / Function	Interface	V_SUPPLY	I_PEAK	P(Motor) max	RDS_ON	Package	Comment
E523.62 (*SoC) Fully Integrated Motor Controller with 4 Half Bridges (under development)	LIN 2.2 autobaud interface and auto-addressing (compliant to LIN 2.0 and 1.3 and SAE-J2602-2), LIN 2.2 SNPD User-configurable GPIOs including SPI,SEND, analog input and ARM-SWD IF	7-18V (5.5V-28V limited; 40V load dump)	4ch with 600mA/ch	≈9W	1.6Ω (HS) 3.0Ω (LS)	TSSOP16-EP	Universal Controller to support BLDC, Stepper and Brushed DC Motors 40MHz ARM® Cortex®-M23 with 64kB Flash SysROM including Bootloader and LIN Stack MotCoS ready
E523.63 (*SoC) Fully Integrated Motor Controller with 4 Half Bridges (under development)	LIN 2.2 autobaud interface and auto-addressing (compliant to LIN 2.0 and 1.3 and SAE-J2602-2), LIN 2.2 SNPD User-configurable GPIOs including SPI,SEND, analog input and ARM-SWD IF	7-18V (5.5V-28V limited; 40V load dump)	4ch with 1000mA/ch	≈15W	0,6Ω (HS) 1,0Ω (LS)	TSSOP16-EP	Universal Controller to support BLDC, Stepper and Brushed DC Motors 40MHz ARM® Cortex®-M23 with 64kB Flash SysROM including Bootloader and LIN Stack MotCoS ready

Optical IR Sensor Rain and Light

Part-No. / Function	V_SUPPLY	Iq	Package	Comment
E527.04 Rain and Light Sensor	3.1V to 3.5V	4.7mA (typical)** 8µA (sleep mode)	QFN20L4	Rain-Light sensor signa processor Built-in sunlight rejection Two rain channels and ambient light channels SPI interface Internal diagnosis Integrated temperature sensor

BLDC Motor BLDC Motor Controller

Part-No. / Function	Interface	V_SUPPLY	I_PEAK	P(Motor) peak	RDS_ON	Package	Comment
E523.42 3 Phase Motor Controller	LIN 2.x (1.3 comp.) SAE-J2602 or PWM bidirectional LIN Flash Update JTAG	7V to 28V (6V to 42V)	6 channel	~14W	0.6 Ω (HS) 0.6 Ω (LS)	QFN32L5	32bit / 24MHz ARM® Cortex®-M0 Library ROM for LIN-stack software update via LIN T_Junc peak = +150°C Software support on request

BLDC Motor BLDC Motor Driver

Part-No. / Function	Interface	V_SUPPLY	I_PEAK	P(Motor) peak	RDS_ON	Package	Comment
E523.01 (*SBC) B6 Bridge FET Driver (LIN/PWM Interface)	LIN 2.x (1.3 comp.), SAE-J2602(only E523.01) or PWM bidirectional LIN Flash update	7V to 28V (5V to 42V)	6 channel	≈1.5kW (external FETs) ≈3W (direct drive)	8Ω (HS) 4Ω (LS)	QFN44L7 QSOP44	Voltage Regulator (3.3V/5V) selectable Precise deadtime generation Watchdog/Diagnostics T_Junc peak = +170°C Demo software on request (sensorless sinus)

Motor Control DC Motor

Part-No. / Function	Interface	V_SUPPLY	I_PEAK	P(Motor) max	RDS_ON	Package	Comment
E523.05 (SoC / Plug & Play) DC 2x Half-Bridge Controller with 16bit CPU (LIN / PWM Interface)	LIN 2.x (1.3 comp.), SAE-J2602 or PWM bidirectional SPI for configuration LIN Flash update JTAG	7V to 28V (5V to 42V)	6 channel	≈1.5kW (external FETs) ≈3W (direct drive)	8Ω (HS) 4Ω (LS)	QFN48L7	16bit/48 MHzCPU assisted by 2 powerful co-processors Library ROM for LIN-stack software update via LIN Charge Pump Driver included T_Junc peak = +125°C (Contact supplier for higher temperature)
E523.06 (*SoC) Field-Oriented DC Motor Controller with 16 Bit CPU	LIN 2.x (1.3 comp.), SAE-J2602 or PWM bidirectional SPI for configuration LIN Flash update JTAG	7V to 28V (5V to 42V)	6x ±400mA	≈1.5kW (external FETs) ≈1.3W (direct drive)	8Ω (HS) 4Ω (LS)	QFN48L7	16bit/48 MHzCPU assisted by 2 powerful co-processors Library ROM for LIN-stack software update via LIN Charge Pump Driver included T_Junc peak = +125°C (Contact supplier for higher temperature)

BLDC Motor BLDC Motor Controller

Part-No. / Function	Interface	V_SUPPLY	I_PEAK	P(Motor) peak	RDS_ON	Package	Comment
E523.05 (*SoC) BLDC Motor Controller with 16bit CPU (LIN/PWM Interface)	LIN 2.x (1.3 comp.), SAE-J2602 or PWM bidirectional SPI for expansion LIN Flash update JTAG	7V to 28V (5V to 42V)	6 channel	≈1.5kW (external FETs) ≈3W (direct drive)	8Ω (HS) 4Ω (LS)	QFN48L7	For new designs E523.06 is recommended 16bit / 48 MHzCPU assisted by 2 powerful co-processors Library ROM for LIN-stack, software update via LIN Software support on request T_Junc peak = +125°C (contact supplier for higher temperature)
E523.06 (*SoC) Field-Oriented BLDC Motor Controller with 16 Bit CPU	LIN 2.x (1.3 comp.), SAE-J2602 or PWM bidirectional SPI for expansion LIN Flash update JTAG	7V to 28V (5V to 42V)	6 channel	≈1.5kW (external FETs) ≈3W (direct drive)	8Ω (HS) 4Ω (LS)	QFN48L7 LQFP48L7EP	16bit / 48 MHzCPU assisted by 2 powerful co-processors Library ROM for LIN-stack, software update via LIN Software support on request T_Junc peak = +125°C (contact supplier for higher temperature) Plug & Play: Demosoftware for - sensorless HVAC fan, engine cooling fan - field oriented control (FOC) for pumps
E523.52 (*SoC) 72V Brushless Motor Gate Driver with 16bit CPU	LIN Interface with external LIN transceiver PWM Interface with external components SPI for user expansion LIN Flash update JTAG	12V to 72V (7V to 76V)	6 channel	≈1.5kW (external FETs)	10Ω (HS) 5Ω (LS)	QFN36L7	Usable for 24/48V automotive Board Net 16bit/48 MHz CPU assisted by 2 powerful co-processors Library ROM for LIN-stack software update via LIN (software support on request) T_Junc peak = +150°C

LIN/CAN Transceiver and System Basis Chip LIN Transceiver and System Basis Chip

Part-No. / Function	Interface	V_SUPPLY	V_DD	Iq	ESD	Bitrate	Package
E521.25 LIN SBC with Voltage Regulator	LIN 2.1 LIN 2.2 SAE-J2602 ISO9141	5V to 28V	3.3V	10µA	8kV	up to 115/250 Kbit/s	QFN20L5

Motor Control Stepper Motor

Part-No. / Function	Interface	Output	V_SUPPLY	I_PEAK	P(Motor) peak	RDS_ON	Package	Comment
E520.03 (*Driver IC) 8x Low-Side for 2 Stepper Motors with Stall Detection	SPI-compatible (3.3/5V)	8 channel	3V to 25V (42V)		≈8x 8.75W	1.5Ω	QFN32L5 SOIC20	Stall detection for stepper motors suitable for Full Step, Half Step, Wave Drive 245Hz LED mode 25kHz relay mode 25kHz linear PWM T_Junc peak = +150°C
E523.62 (*SoC) Fully Integrated Motor Controller with 4 Half Bridges (under development)	LIN 2.2 autobaud interface and auto-addressing (compliant to LIN 2.0 and 1.3 and SAE-J2602-2), LIN 2.2 SNPD User-configurable GPIOs including SPI,SEND, analog input and ARM-SWD IF		7-18V (5.5V-28V limited; 40V load dump)	4ch with 600mA/ch	≈9W	1.6Ω (HS) 3.0Ω (LS)	TSSOP16-EP	Universal Controller to support BLDC, Stepper and Brushed DC Motors 40MHz ARM® Cortex®-M23 with 64kB Flash SysROM including Bootloader and LIN Stack MotCoS ready
E523.63 (*SoC) Fully Integrated Motor Controller with 4 Half Bridges (under development)	LIN 2.2 autobaud interface and auto-addressing (compliant to LIN 2.0 and 1.3 and SAE-J2602-2), LIN 2.2 SNPD User-configurable GPIOs including SPI,SEND, analog input and ARM-SWD IF		7-18V (5.5V-28V limited; 40V load dump)	4ch with 1000mA/ch	≈15W	0,6Ω (HS) 1,0Ω (LS)	TSSOP16-EP	Universal Controller to support BLDC, Stepper and Brushed DC Motors 40MHz ARM® Cortex®-M23 with 64kB Flash SysROM including Bootloader and LIN Stack MotCoS ready

BLDC Motor BLDC Motor Driver

Part-No. / Function	Interface	V_SUPPLY	I_PEAK	P(Motor) peak	RDS_ON	Package	Comment
E523.01 (*SBC) B6 Bridge FET Driver (LIN/PWM Interface)	LIN 2.x (1.3 comp.), SAE-J2602(only E523.01) or PWM bidirectional LIN Flash update	7V to 28V (5V to 42V)	6 channel	≈1.5kW (external FETs) ≈3W (direct drive)	8Ω (HS) 4Ω (LS)	QFN44L7 QSOP44	Voltage Regulator (3.3V/5V) selectable Precise deadtime generation Watchdog/Diagnostics T_Junc peak = +170°C Demo software on request (sensorless sinus)
E523.10 (*SoC) BLDC-Motor Driver with Cold-Crank Capability	PWM bidirectional SPI for configuration	7V to 28V (4.5V to 42V)	6 channel	≈1.5kW (external FETs) ≈3W (direct drive)	8Ω (HS) 4Ω (LS)	QFN44L7	Voltage Regulator (3.3V/5V) selectable Precise deadtime generation Watchdog/Diagnostics T_Junc peak = +170°C

Motor Control DC Motor

Part-No. / Function	Interface	V_SUPPLY	I_PEAK	P(Motor) max	RDS_ON	Package	Comment
E523.05 (SoC / Plug & Play) DC 2x Half-Bridge Controller with 16bit CPU (LIN / PWM Interface)	LIN 2.x (1.3 comp.), SAE-J2602 or PWM bidirectional SPI for configuration LIN Flash update JTAG	7V to 28V (5V to 42V)	6 channel	≈1.5kW (external FETs) ≈3W (direct drive)	8Ω (HS) 4Ω (LS)	QFN48L7	16bit/48 MHzCPU assisted by 2 powerful co-processors Library ROM for LIN-stack software update via LIN Charge Pump Driver included T_Junc peak = +125°C (Contact supplier for higher temperature)
E523.06 (*SoC) Field-Oriented DC Motor Controller with 16 Bit CPU	LIN 2.x (1.3 comp.), SAE-J2602 or PWM bidirectional SPI for configuration LIN Flash update JTAG	7V to 28V (5V to 42V)	6x ±400mA	≈1.5kW (external FETs) ≈1.3W (direct drive)	8Ω (HS) 4Ω (LS)	QFN48L7	16bit/48 MHzCPU assisted by 2 powerful co-processors Library ROM for LIN-stack software update via LIN Charge Pump Driver included T_Junc peak = +125°C (Contact supplier for higher temperature)
E523.26 (*SoC) DC Motor Driver with 16kB Flash	LIN 2.x (1.3) or SAE-J2602 SPI for configuration	5V to 20V (5V to 40V)	1 channel	≈1.5kW (external FETs) ≈1.3W (direct drive)	8Ω (HS) 8Ω (LS)	QFN32L6	Includes μC, memory, interfaces, high side gate driver, supply and measurement functions T_Junc peak = +150°C
E523.30 (*SoC) 2x Full Bridge Controller (LIN / PWM Interface)	LIN 2.x (1.3) or SAE-J2602 or PWM bidirectional LIN auto-addressing (slave mode position detection) LIN Flash update for EoL and Service JTAG	7V to 20V (5.5V to 42V)	2 channel	≈25W (per Motor)	225mΩ (HS) 275mΩ (LS)	QFN32L6	Drives 1 or 2 DC motors 8bit CPU, 8k FLASH, 64Byte E²PROM Current chopper motor control Supply and read-out of up to 3, potentiometers or sensors GPIO-pins T_Junc peak = +170°C (contact supplier for higher temperatures) (*Plug & Play) - Demosoftware on request
E523.62 (*SoC) Fully Integrated Motor Controller with 4 Half Bridges (under development)	LIN 2.2 autobaud interface and auto-addressing (compliant to LIN 2.0 and 1.3 and SAE-J2602-2), LIN 2.2 SNPD User-configurable GPIOs including SPI,SEND, analog input and ARM-SWD IF	7-18V (5.5V-28V limited; 40V load dump)	4ch with 600mA/ch	≈9W	1.6Ω (HS) 3.0Ω (LS)	TSSOP16-EP	Universal Controller to support BLDC, Stepper and Brushed DC Motors 40MHz ARM® Cortex®-M23 with 64kB Flash SysROM including Bootloader and LIN Stack MotCoS ready
E523.63 (*SoC) Fully Integrated Motor Controller with 4 Half Bridges (under development)	LIN 2.2 autobaud interface and auto-addressing (compliant to LIN 2.0 and 1.3 and SAE-J2602-2), LIN 2.2 SNPD User-configurable GPIOs including SPI,SEND, analog input and ARM-SWD IF	7-18V (5.5V-28V limited; 40V load dump)	4ch with 1000mA/ch	≈15W	0,6Ω (HS) 1,0Ω (LS)	TSSOP16-EP	Universal Controller to support BLDC, Stepper and Brushed DC Motors 40MHz ARM® Cortex®-M23 with 64kB Flash SysROM including Bootloader and LIN Stack MotCoS ready
E910.72 (*Driver IC) 6x Half-Bridge DC Motor with sensorless positioning	SPI™ for configuration	6V to 19V (40V)	-	≈7W (1 Motor Mode)	1.25Ω	QFN32L5	Sensorless motor positioning 3 independent pulse detectors Excellent positioning performance Drives 3 or 5 DC actuators T_Junc peak = +150°C

BLDC Motor BLDC Motor Controller

Part-No. / Function	Interface	V_SUPPLY	I_PEAK	P(Motor) peak	RDS_ON	Package	Comment
E523.05 (*SoC) BLDC Motor Controller with 16bit CPU (LIN/PWM Interface)	LIN 2.x (1.3 comp.), SAE-J2602 or PWM bidirectional SPI for expansion LIN Flash update JTAG	7V to 28V (5V to 42V)	6 channel	≈1.5kW (external FETs) ≈3W (direct drive)	8Ω (HS) 4Ω (LS)	QFN48L7	For new designs E523.06 is recommended 16bit / 48 MHzCPU assisted by 2 powerful co-processors Library ROM for LIN-stack, software update via LIN Software support on request T_Junc peak = +125°C (contact supplier for higher temperature)
E523.06 (*SoC) Field-Oriented BLDC Motor Controller with 16 Bit CPU	LIN 2.x (1.3 comp.), SAE-J2602 or PWM bidirectional SPI for expansion LIN Flash update JTAG	7V to 28V (5V to 42V)	6 channel	≈1.5kW (external FETs) ≈3W (direct drive)	8Ω (HS) 4Ω (LS)	QFN48L7 LQFP48L7EP	16bit / 48 MHzCPU assisted by 2 powerful co-processors Library ROM for LIN-stack, software update via LIN Software support on request T_Junc peak = +125°C (contact supplier for higher temperature) Plug & Play: Demosoftware for - sensorless HVAC fan, engine cooling fan - field oriented control (FOC) for pumps
E523.52 (*SoC) 72V Brushless Motor Gate Driver with 16bit CPU	LIN Interface with external LIN transceiver PWM Interface with external components SPI for user expansion LIN Flash update JTAG	12V to 72V (7V to 76V)	6 channel	≈1.5kW (external FETs)	10Ω (HS) 5Ω (LS)	QFN36L7	Usable for 24/48V automotive Board Net 16bit/48 MHz CPU assisted by 2 powerful co-processors Library ROM for LIN-stack software update via LIN (software support on request) T_Junc peak = +150°C
E523.62 (*SoC) Fully Integrated Motor Controller with 4 Half Bridges (under development)	LIN 2.2 autobaud interface and auto-addressing (compliant to LIN 2.0 and 1.3 and SAE-J2602-2), LIN 2.2 SNPD User-configurable GPIOs including SPI,SEND, analog input and ARM-SWD IF	7-18V (5.5V-28V limited; 40V load dump)	4ch with 600mA/ch	≈9W	1.6Ω (HS) 3.0Ω (LS)	TSSOP16-EP	Universal Controller to support BLDC, Stepper and Brushed DC Motors 40MHz ARM® Cortex®-M23 with 64kB Flash SysROM including Bootloader and LIN Stack MotCoS ready
E523.63 (*SoC) Fully Integrated Motor Controller with 4 Half Bridges (under development)	LIN 2.2 autobaud interface and auto-addressing (compliant to LIN 2.0 and 1.3 and SAE-J2602-2), LIN 2.2 SNPD User-configurable GPIOs including SPI,SEND, analog input and ARM-SWD IF	7-18V (5.5V-28V limited; 40V load dump)	4ch with 1000mA/ch	≈15W	0,6Ω (HS) 1,0Ω (LS)	TSSOP16-EP	Universal Controller to support BLDC, Stepper and Brushed DC Motors 40MHz ARM® Cortex®-M23 with 64kB Flash SysROM including Bootloader and LIN Stack MotCoS ready

Motor Control Stepper Motor

Part-No. / Function	Interface	Output	V_SUPPLY	I_PEAK	P(Motor) peak	RDS_ON	Package	Comment
E520.01 (*Driver IC) 12x Low-Side for 3 Stepper Motors with Stall Detection	SPI-compatible (3.3/5V)	12 channel	3V to 25V (42V)		≈12x 8.75W	1.5Ω	QFN32L5	Stall detection for stepper motors (E520.01) suitable for Full Step, Half Step, Wave Drive 245Hz LED mode 25kHz relay mode 25kHz linear PWM T_Junc peak = +150°C
E520.02 (*Driver IC) 12x Low-Side for 3 Stepper Motors	SPI-compatible (3.3/5V)	12 channel	3V to 25V (42V)		≈12x 8.75W	1.5Ω	QFN32L5	245Hz LED mode 25kHz relay mode 25kHz linear PWM T_Junc peak = +150°C
E520.03 (*Driver IC) 8x Low-Side for 2 Stepper Motors with Stall Detection	SPI-compatible (3.3/5V)	8 channel	3V to 25V (42V)		≈8x 8.75W	1.5Ω	QFN32L5 SOIC20	Stall detection for stepper motors suitable for Full Step, Half Step, Wave Drive 245Hz LED mode 25kHz relay mode 25kHz linear PWM T_Junc peak = +150°C
E523.30 (*SoC) Power Stepper Controller with Stall Detection and Auto Addressing (LIN/PWM Interface)	LIN 2.x (1.3 comp.) or SAE-J2602 or PWM Interface Optional LIN Auto-Addressing (SNPD) only E523.30 or LIN Flash update JTAG	2 channel	5.5V to 20V (42V)		≈ 25W	550mΩ(HS) 450mΩ(LS)	QFN32L6	Current chopper motor control Supply and read-out of up to 3 sensors Embedded 8bit µC 8k FLASH T_Junc peak = +170°C
E523.39 (*Plug & Play) SPI Stepper Driver	SPI-compatible (3.3/5V)	2 channel	5V to 28V (42V)		40W	0.5Ω (HS) 0.5Ω (LS)	QFN20L5 QFN32L6	Stall-Detection / analysis / position correction Sensitive Fail-Current-Detection Over modulation with customized waveforms Supporting Adaptive-Holding-Torque Supporting Adaptive-Run-Current T_Junc peak = +170°C
E523.62 (*SoC) Fully Integrated Motor Controller with 4 Half Bridges (under development)	LIN 2.2 autobaud interface and auto-addressing (compliant to LIN 2.0 and 1.3 and SAE-J2602-2), LIN 2.2 SNPD User-configurable GPIOs including SPI,SEND, analog input and ARM-SWD IF		7-18V (5.5V-28V limited; 40V load dump)	4ch with 600mA/ch	≈9W	1.6Ω (HS) 3.0Ω (LS)	TSSOP16-EP	Universal Controller to support BLDC, Stepper and Brushed DC Motors 40MHz ARM® Cortex®-M23 with 64kB Flash SysROM including Bootloader and LIN Stack MotCoS ready
E523.63 (*SoC) Fully Integrated Motor Controller with 4 Half Bridges (under development)	LIN 2.2 autobaud interface and auto-addressing (compliant to LIN 2.0 and 1.3 and SAE-J2602-2), LIN 2.2 SNPD User-configurable GPIOs including SPI,SEND, analog input and ARM-SWD IF		7-18V (5.5V-28V limited; 40V load dump)	4ch with 1000mA/ch	≈15W	0,6Ω (HS) 1,0Ω (LS)	TSSOP16-EP	Universal Controller to support BLDC, Stepper and Brushed DC Motors 40MHz ARM® Cortex®-M23 with 64kB Flash SysROM including Bootloader and LIN Stack MotCoS ready

BLDC Motor BLDC Motor Driver

Part-No. / Function	Interface	V_SUPPLY	I_PEAK	P(Motor) peak	RDS_ON	Package	Comment
E523.01 (*SBC) B6 Bridge FET Driver (LIN/PWM Interface)	LIN 2.x (1.3 comp.), SAE-J2602(only E523.01) or PWM bidirectional LIN Flash update	7V to 28V (5V to 42V)	6 channel	≈1.5kW (external FETs) ≈3W (direct drive)	8Ω (HS) 4Ω (LS)	QFN44L7 QSOP44	Voltage Regulator (3.3V/5V) selectable Precise deadtime generation Watchdog/Diagnostics T_Junc peak = +170°C Demo software on request (sensorless sinus)
E523.10 (*SoC) BLDC-Motor Driver with Cold-Crank Capability	PWM bidirectional SPI for configuration	7V to 28V (4.5V to 42V)	6 channel	≈1.5kW (external FETs) ≈3W (direct drive)	8Ω (HS) 4Ω (LS)	QFN44L7	Voltage Regulator (3.3V/5V) selectable Precise deadtime generation Watchdog/Diagnostics T_Junc peak = +170°C

Motor Control DC Motor

Part-No. / Function	Interface	V_SUPPLY	I_PEAK	P(Motor) max	RDS_ON	Package	Comment
E523.05 (SoC / Plug & Play) DC 2x Half-Bridge Controller with 16bit CPU (LIN / PWM Interface)	LIN 2.x (1.3 comp.), SAE-J2602 or PWM bidirectional SPI for configuration LIN Flash update JTAG	7V to 28V (5V to 42V)	6 channel	≈1.5kW (external FETs) ≈3W (direct drive)	8Ω (HS) 4Ω (LS)	QFN48L7	16bit/48 MHzCPU assisted by 2 powerful co-processors Library ROM for LIN-stack software update via LIN Charge Pump Driver included T_Junc peak = +125°C (Contact supplier for higher temperature)
E523.06 (*SoC) Field-Oriented DC Motor Controller with 16 Bit CPU	LIN 2.x (1.3 comp.), SAE-J2602 or PWM bidirectional SPI for configuration LIN Flash update JTAG	7V to 28V (5V to 42V)	6x ±400mA	≈1.5kW (external FETs) ≈1.3W (direct drive)	8Ω (HS) 4Ω (LS)	QFN48L7	16bit/48 MHzCPU assisted by 2 powerful co-processors Library ROM for LIN-stack software update via LIN Charge Pump Driver included T_Junc peak = +125°C (Contact supplier for higher temperature)
E523.26 (*SoC) DC Motor Driver with 16kB Flash	LIN 2.x (1.3) or SAE-J2602 SPI for configuration	5V to 20V (5V to 40V)	1 channel	≈1.5kW (external FETs) ≈1.3W (direct drive)	8Ω (HS) 8Ω (LS)	QFN32L6	Includes μC, memory, interfaces, high side gate driver, supply and measurement functions T_Junc peak = +150°C
E523.62 (*SoC) Fully Integrated Motor Controller with 4 Half Bridges (under development)	LIN 2.2 autobaud interface and auto-addressing (compliant to LIN 2.0 and 1.3 and SAE-J2602-2), LIN 2.2 SNPD User-configurable GPIOs including SPI,SEND, analog input and ARM-SWD IF	7-18V (5.5V-28V limited; 40V load dump)	4ch with 600mA/ch	≈9W	1.6Ω (HS) 3.0Ω (LS)	TSSOP16-EP	Universal Controller to support BLDC, Stepper and Brushed DC Motors 40MHz ARM® Cortex®-M23 with 64kB Flash SysROM including Bootloader and LIN Stack MotCoS ready
E523.63 (*SoC) Fully Integrated Motor Controller with 4 Half Bridges (under development)	LIN 2.2 autobaud interface and auto-addressing (compliant to LIN 2.0 and 1.3 and SAE-J2602-2), LIN 2.2 SNPD User-configurable GPIOs including SPI,SEND, analog input and ARM-SWD IF	7-18V (5.5V-28V limited; 40V load dump)	4ch with 1000mA/ch	≈15W	0,6Ω (HS) 1,0Ω (LS)	TSSOP16-EP	Universal Controller to support BLDC, Stepper and Brushed DC Motors 40MHz ARM® Cortex®-M23 with 64kB Flash SysROM including Bootloader and LIN Stack MotCoS ready
E910.72 (*Driver IC) 6x Half-Bridge DC Motor with sensorless positioning	SPI™ for configuration	6V to 19V (40V)	-	≈7W (1 Motor Mode)	1.25Ω	QFN32L5	Sensorless motor positioning 3 independent pulse detectors Excellent positioning performance Drives 3 or 5 DC actuators T_Junc peak = +150°C

BLDC Motor BLDC Motor Controller

Part-No. / Function	Interface	V_SUPPLY	I_PEAK	P(Motor) peak	RDS_ON	Package	Comment
E523.05 (*SoC) BLDC Motor Controller with 16bit CPU (LIN/PWM Interface)	LIN 2.x (1.3 comp.), SAE-J2602 or PWM bidirectional SPI for expansion LIN Flash update JTAG	7V to 28V (5V to 42V)	6 channel	≈1.5kW (external FETs) ≈3W (direct drive)	8Ω (HS) 4Ω (LS)	QFN48L7	For new designs E523.06 is recommended 16bit / 48 MHzCPU assisted by 2 powerful co-processors Library ROM for LIN-stack, software update via LIN Software support on request T_Junc peak = +125°C (contact supplier for higher temperature)
E523.06 (*SoC) Field-Oriented BLDC Motor Controller with 16 Bit CPU	LIN 2.x (1.3 comp.), SAE-J2602 or PWM bidirectional SPI for expansion LIN Flash update JTAG	7V to 28V (5V to 42V)	6 channel	≈1.5kW (external FETs) ≈3W (direct drive)	8Ω (HS) 4Ω (LS)	QFN48L7 LQFP48L7EP	16bit / 48 MHzCPU assisted by 2 powerful co-processors Library ROM for LIN-stack, software update via LIN Software support on request T_Junc peak = +125°C (contact supplier for higher temperature) Plug & Play: Demosoftware for - sensorless HVAC fan, engine cooling fan - field oriented control (FOC) for pumps
E523.52 (*SoC) 72V Brushless Motor Gate Driver with 16bit CPU	LIN Interface with external LIN transceiver PWM Interface with external components SPI for user expansion LIN Flash update JTAG	12V to 72V (7V to 76V)	6 channel	≈1.5kW (external FETs)	10Ω (HS) 5Ω (LS)	QFN36L7	Usable for 24/48V automotive Board Net 16bit/48 MHz CPU assisted by 2 powerful co-processors Library ROM for LIN-stack software update via LIN (software support on request) T_Junc peak = +150°C
E523.62 (*SoC) Fully Integrated Motor Controller with 4 Half Bridges (under development)	LIN 2.2 autobaud interface and auto-addressing (compliant to LIN 2.0 and 1.3 and SAE-J2602-2), LIN 2.2 SNPD User-configurable GPIOs including SPI,SEND, analog input and ARM-SWD IF	7-18V (5.5V-28V limited; 40V load dump)	4ch with 600mA/ch	≈9W	1.6Ω (HS) 3.0Ω (LS)	TSSOP16-EP	Universal Controller to support BLDC, Stepper and Brushed DC Motors 40MHz ARM® Cortex®-M23 with 64kB Flash SysROM including Bootloader and LIN Stack MotCoS ready
E523.63 (*SoC) Fully Integrated Motor Controller with 4 Half Bridges (under development)	LIN 2.2 autobaud interface and auto-addressing (compliant to LIN 2.0 and 1.3 and SAE-J2602-2), LIN 2.2 SNPD User-configurable GPIOs including SPI,SEND, analog input and ARM-SWD IF	7-18V (5.5V-28V limited; 40V load dump)	4ch with 1000mA/ch	≈15W	0,6Ω (HS) 1,0Ω (LS)	TSSOP16-EP	Universal Controller to support BLDC, Stepper and Brushed DC Motors 40MHz ARM® Cortex®-M23 with 64kB Flash SysROM including Bootloader and LIN Stack MotCoS ready

Sensors Sensor Signal Processor (SSP)

Part-No. / Function	Output	Range	V_SUPPLY	Package	Comment
E520.42 Automotive SSP with Analog or Sent Output	5V Ratiometric Voltage SENT interface	Sensor Sensitivity 0.8mV/V to 50mV/V	5V ±0.5V	QFN20L4 Bare-Die	Automotive protection +40 / -28V Very low noise front-end Trimmable input low-pass filter Comprehensive self diagnostics SENT interface (SAE J2716, Jan 2010)
E520.47 Dual-Bridge Sensor Signal Processor with SENT Interface	SENT or I²C	Sensor Sensitivity 3mV/V to 56mV/V	5V ±0.25V	QFN20L4 Bare-Die	Automotive protection +35/-18V Two fully redundant sensor bridge inputs ISO26262 development for ASIL C support Configurable SENT interface AECQ-100 qualified

Special Projects Relay Driver

Part-No. / Function	Interface	High-Side Driven	Low-Side Driven	Bi-Stabil	Included µC	Feed-Back Inputs	Package	Comment
E523.01 (*SBC) LIN2.x Relay Node SBC for 6/5 Relays	LIN1.3/2.x/PWM	6 or	6 or	5	External 3.3V/5V	0 ( to ext.µC)	QFN44L7 QSOP44 QFN48L7	Regulator Watchdog
E523.02, E523.12 (*SBC) LIN2.x Relay Node SBC for 4/3 Relays	LIN1.3/2.x/PWM	4 or	4 or	3	External 3.3V/5V	0 ( to ext.µC)	QFN44L7 QSOP44	Regulator Watchdog
E523.06 (*SoC) Free Programmable LIN2.x Relay Node for 6/5 relays	LIN1.3/2.x/PWM Flashable via LIN	6 or	6 or	5	16 bit 4-48Mhz	8	QFN48L7	32k FLASH (free programmble) 16k SysROM (hardware LIN library) 4k RAM
E523.30, E523.31, E523.34, E523.37 (*SoC) Free Programmable LIN2.x Relay Node for 2-4 relays	LIN1.3/2.x/PWM LIN auto-addressing Flashable via LIN	2 or	2 or	3	8 bit	3	QFN32L6	8k FLASH and ROM + 4k SysROM library switchable 5V supply for external needs 3.3V ADC reference for ratiometric measurements ROM version available

BLDC Motor BLDC Motor Controller

Part-No. / Function	Interface	V_SUPPLY	I_PEAK	P(Motor) peak	RDS_ON	Package	Comment
E523.05 (*SoC) BLDC Motor Controller with 16bit CPU (LIN/PWM Interface)	LIN 2.x (1.3 comp.), SAE-J2602 or PWM bidirectional SPI for expansion LIN Flash update JTAG	7V to 28V (5V to 42V)	6 channel	≈1.5kW (external FETs) ≈3W (direct drive)	8Ω (HS) 4Ω (LS)	QFN48L7	For new designs E523.06 is recommended 16bit / 48 MHzCPU assisted by 2 powerful co-processors Library ROM for LIN-stack, software update via LIN Software support on request T_Junc peak = +125°C (contact supplier for higher temperature)
E523.06 (*SoC) Field-Oriented BLDC Motor Controller with 16 Bit CPU	LIN 2.x (1.3 comp.), SAE-J2602 or PWM bidirectional SPI for expansion LIN Flash update JTAG	7V to 28V (5V to 42V)	6 channel	≈1.5kW (external FETs) ≈3W (direct drive)	8Ω (HS) 4Ω (LS)	QFN48L7 LQFP48L7EP	16bit / 48 MHzCPU assisted by 2 powerful co-processors Library ROM for LIN-stack, software update via LIN Software support on request T_Junc peak = +125°C (contact supplier for higher temperature) Plug & Play: Demosoftware for - sensorless HVAC fan, engine cooling fan - field oriented control (FOC) for pumps
E523.62 (*SoC) Fully Integrated Motor Controller with 4 Half Bridges (under development)	LIN 2.2 autobaud interface and auto-addressing (compliant to LIN 2.0 and 1.3 and SAE-J2602-2), LIN 2.2 SNPD User-configurable GPIOs including SPI,SEND, analog input and ARM-SWD IF	7-18V (5.5V-28V limited; 40V load dump)	4ch with 600mA/ch	≈9W	1.6Ω (HS) 3.0Ω (LS)	TSSOP16-EP	Universal Controller to support BLDC, Stepper and Brushed DC Motors 40MHz ARM® Cortex®-M23 with 64kB Flash SysROM including Bootloader and LIN Stack MotCoS ready
E523.63 (*SoC) Fully Integrated Motor Controller with 4 Half Bridges (under development)	LIN 2.2 autobaud interface and auto-addressing (compliant to LIN 2.0 and 1.3 and SAE-J2602-2), LIN 2.2 SNPD User-configurable GPIOs including SPI,SEND, analog input and ARM-SWD IF	7-18V (5.5V-28V limited; 40V load dump)	4ch with 1000mA/ch	≈15W	0,6Ω (HS) 1,0Ω (LS)	TSSOP16-EP	Universal Controller to support BLDC, Stepper and Brushed DC Motors 40MHz ARM® Cortex®-M23 with 64kB Flash SysROM including Bootloader and LIN Stack MotCoS ready

Motor Control DC Motor

Part-No. / Function	Interface	V_SUPPLY	I_PEAK	P(Motor) max	RDS_ON	Package	Comment
E523.06 (*SoC) Field-Oriented DC Motor Controller with 16 Bit CPU	LIN 2.x (1.3 comp.), SAE-J2602 or PWM bidirectional SPI for configuration LIN Flash update JTAG	7V to 28V (5V to 42V)	6x ±400mA	≈1.5kW (external FETs) ≈1.3W (direct drive)	8Ω (HS) 4Ω (LS)	QFN48L7	16bit/48 MHzCPU assisted by 2 powerful co-processors Library ROM for LIN-stack software update via LIN Charge Pump Driver included T_Junc peak = +125°C (Contact supplier for higher temperature)
E523.62 (*SoC) Fully Integrated Motor Controller with 4 Half Bridges (under development)	LIN 2.2 autobaud interface and auto-addressing (compliant to LIN 2.0 and 1.3 and SAE-J2602-2), LIN 2.2 SNPD User-configurable GPIOs including SPI,SEND, analog input and ARM-SWD IF	7-18V (5.5V-28V limited; 40V load dump)	4ch with 600mA/ch	≈9W	1.6Ω (HS) 3.0Ω (LS)	TSSOP16-EP	Universal Controller to support BLDC, Stepper and Brushed DC Motors 40MHz ARM® Cortex®-M23 with 64kB Flash SysROM including Bootloader and LIN Stack MotCoS ready
E523.63 (*SoC) Fully Integrated Motor Controller with 4 Half Bridges (under development)	LIN 2.2 autobaud interface and auto-addressing (compliant to LIN 2.0 and 1.3 and SAE-J2602-2), LIN 2.2 SNPD User-configurable GPIOs including SPI,SEND, analog input and ARM-SWD IF	7-18V (5.5V-28V limited; 40V load dump)	4ch with 1000mA/ch	≈15W	0,6Ω (HS) 1,0Ω (LS)	TSSOP16-EP	Universal Controller to support BLDC, Stepper and Brushed DC Motors 40MHz ARM® Cortex®-M23 with 64kB Flash SysROM including Bootloader and LIN Stack MotCoS ready

BLDC Motor BLDC Motor Driver

Part-No. / Function	Interface	V_SUPPLY	I_PEAK	P(Motor) peak	RDS_ON	Package	Comment
E523.10 (*SoC) BLDC-Motor Driver with Cold-Crank Capability	PWM bidirectional SPI for configuration	7V to 28V (4.5V to 42V)	6 channel	≈1.5kW (external FETs) ≈3W (direct drive)	8Ω (HS) 4Ω (LS)	QFN44L7	Voltage Regulator (3.3V/5V) selectable Precise deadtime generation Watchdog/Diagnostics T_Junc peak = +170°C

Motor Control Stepper Motor

Part-No. / Function	Interface	V_SUPPLY	I_PEAK	P(Motor) peak	RDS_ON	Package	Comment
E523.62 (*SoC) Fully Integrated Motor Controller with 4 Half Bridges (under development)	LIN 2.2 autobaud interface and auto-addressing (compliant to LIN 2.0 and 1.3 and SAE-J2602-2), LIN 2.2 SNPD User-configurable GPIOs including SPI,SEND, analog input and ARM-SWD IF	7-18V (5.5V-28V limited; 40V load dump)	4ch with 600mA/ch	≈9W	1.6Ω (HS) 3.0Ω (LS)	TSSOP16-EP	Universal Controller to support BLDC, Stepper and Brushed DC Motors 40MHz ARM® Cortex®-M23 with 64kB Flash SysROM including Bootloader and LIN Stack MotCoS ready
E523.63 (*SoC) Fully Integrated Motor Controller with 4 Half Bridges (under development)	LIN 2.2 autobaud interface and auto-addressing (compliant to LIN 2.0 and 1.3 and SAE-J2602-2), LIN 2.2 SNPD User-configurable GPIOs including SPI,SEND, analog input and ARM-SWD IF	7-18V (5.5V-28V limited; 40V load dump)	4ch with 1000mA/ch	≈15W	0,6Ω (HS) 1,0Ω (LS)	TSSOP16-EP	Universal Controller to support BLDC, Stepper and Brushed DC Motors 40MHz ARM® Cortex®-M23 with 64kB Flash SysROM including Bootloader and LIN Stack MotCoS ready

Special Projects Relay Driver

Part-No. / Function	Interface	High-Side Driven	Low-Side Driven	Bi-Stabil	Included µC	Feed-Back Inputs	Package	Comment
E520.02 (*Driver IC) 12x Low-Side Relay driver with constant holding current	SPI	-	12/08	-	External	0 (to ext. µC)	QFN32L5	Automatical V_BAT dependent PWM generation for constant holding current

Cookie-Einstellungen

Unsere Webseite verwendet technisch notwendige Cookies, die zwingend gesetzt werden müssen, damit diese Webseite richtig dargestellt werden kann. Darüber hinaus setzen wir Statistik-Cookies ein, um den Erfolg dieser Webseite nachvollziehen zu können. Die Cookie-Einstellungen können Sie über die Schaltfläche „Cookie-Popup anzeigen“ (in der Regel links unten oder im Footer) jederzeit wieder bearbeiten. Sollten Sie in die Cookies für Statistiken nicht mehr einwilligen wollen, deaktivieren Sie die Checkboxen. Weitere Informationen finden Sie in unseren Datenschutzhinweisen.

Weitere Details zu den von uns bzw. von Dritten auf unserer Webseite verwendeten Cookies finden Sie hier.

Notwendig Statistiken

	Titel	Anbieter	Grund	Gültigkeitsdauer	Name(n)	Domain(s)
Notwendig
	__cfduid	SiteSearch 360	Verwendet vom Content-Netzwerk Cloudflare, um vertrauenswürdigen Web-Traffic zu identifizieren.	1 Jahr	__cfduid	sitesearch360.com
	SiteSearch 360	SiteSearch 360	Wird genutzt für die Suchfunktion der Website	1 Tag	ssi--sessionId,ssi--lastInteraction	www.elmos.com
	HackShield EU-Cookie Opt-in	Elmos Semiconductor SE	Speichert die Einstellungen des Cookiebanners	1 Jahr	hst3_cookieconsent	www.elmos.com
Statistiken
	Matomo (Piwik)	Matomo (Piwik)	Besucherstatistiken zur Optimierung des Website-Angebotes, Fehleranalyse, Cyber Security pk_id - 13 Monate (verwendet, um einige Details über den Benutzer zu speichern, wie z.B. die eindeutige Besucher-ID) _pk_ref - 6 Monate (zur Speicherung der Attributionsinformationen, derjenige, der ursprünglich zum Besuch der Website verwendet wurde) _pk_ses, _pk_cvar, _pk_hsr - 30 Minuten (kurzlebige Cookies zur temporären Speicherung von Daten für den Besuch) _pk_testcookie wird erstellt und sollte dann direkt gelöscht werden (zur Überprüfung, ob der Browser des Besuchers Cookies unterstützt)	bis 13 Monate	_pk_ref, _pk_cvar, _pk_id, _pk_ses, _pk_hsr, _pk_testcookie, MATOMO_SESSID	www.elmos.com, kundenbereich.plehn-media.de